Chapter 22 Logs
P-79X Series User’s Guide
209
22.4 SMTP Error Messages
If there are difficulties in sending e-mail the following error message appears.
“SMTP action request failed. ret= ??". The “??"are described in the following table.
Log Schedule This drop-down menu is used to configure the frequency of log messages being
sent as E-mail:
•Daily
•Weekly
•Hourly
• When Log is Full
•None.
If you select Weekly or Daily, specify a time of day when the E-mail should be
sent. If you select Weekly, then also specify which day of the week the E-mail
should be sent. If you select When Log is Full, an alert is sent when the log fills
up. If you select None, no log messages are sent.
Day for Sending
Log
Use the drop down list box to select which day of the week to send the logs.
Time for
Sending Log
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm)
to send the logs.
Clear log after
sending mail
Select the checkbox to delete all the logs after the P-79X sends an E-mail of the
logs.
Syslog Logging The P-79X sends a log to an external syslog server.
Active Click Active to enable syslog logging.
Syslog IP
Address
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Log Facility Select a location from the drop down list box. The log facility allows you to log the
messages to different files in the syslog server. Refer to the syslog server manual
for more information.
Active Log and Alert
Log Select the categories of logs that you want to record.
Send
Immediate Alert
Select log categories for which you want the P-79X to send E-mail alerts
immediately.
Apply Click this to save your customized settings and exit this screen.
Cancel Click this to restore your previously saved settings.
Table 85 Maintenance > Logs > Log Settings
LABEL DESCRIPTION
Table 86 SMTP Error Messages
-1 means P-79X out of socket
-2 means tcp SYN fail
-3 means smtp server OK fail
-4 means HELO fail
-5 means MAIL FROM fail
-6 means RCPT TO fail
To Next Page
Loading...
