P-79X Series User’s Guide
243
APPENDIX B
Wall-mounting Instructions
Do the following to hang your P-79X on a wall.
Note: See the product specifications appendix for the size of screws to use and how far
apart to place them.
1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance between the centers of the holes matches
what is listed in the product specifications appendix.
Note: Be careful to avoid damaging pipes or cables located inside the wall when drilling
holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the
heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the P-79X
with the connection cables.
5 Align the holes on the back of the P-79X with the screws on the wall. Hang the P-79X on the
screws.
Figure 139 Wall-mounting Example
To Next Page
Loading...
