Chapter 16 802.1Q
P-79X Series User’s Guide
162
To set a high priority for VoIP traffic, follow these steps.
1 Click Advanced > 802.1Q > Port Setting to display the following screen.
2 Type 2 in the 802.1Q PVID column for LAN1and LAN2.
3 Click Apply.
Advanced > 802.1Q/1P > P ort Setting: Example
Ports 3 and 4 are connected to desktop computers and are used for Internet traffic.
Follow the same steps as in VLAN2 to configure the settings for VLAN3. The summary screen should
then display as follows.
To Next Page
Loading...
