Chapter 16 802.1Q
P-79X Series User’s Guide
164
Figure 98 Advanced > 802.1Q > Group Setting
The following table describes the labels in this screen.
Table 64 Advanced > 802.1Q > Group Setting
LABEL DESCRIPTION
802.1Q
Active Select this check box to activate the 802.1Q feature.
Management Vlan
ID
Enter the ID number of a VLAN group. All interfaces (ports and SSIDs) are in
the management VLAN by default. If you disable the management VLAN, you
will not be able to access the P-79X.
Summary
# This field displays the index number of the VLAN group.
Name This field displays the name of the VLAN group.
VID This field displays the ID number of the VLAN group.
Port Number These columns display the VLAN’s settings for each port. A tagged port is
marked as T, an untagged port is marked as U and ports not participating in a
VLAN are marked as “–“.
Modify Click the Edit button to configure the ports in the VLAN group.
Click the Remove button to delete the VLAN group.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
