Chapter 18 Dynamic DNS Setup
P-79X Series User’s Guide
179
Figure 109 Advanced > Dynamic DNS
The following table describes the fields in this screen.
Table 72 Advanced > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS Setup
Active Dynamic
DNS
Select this check box to use dynamic DNS.
Service Provider This is the name of your Dynamic DNS service provider.
Dynamic DNS
Type
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Host Name Type the domain name assigned to your P-79X by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
User Name Type your user name.
Password Type the password assigned to you.
Enable Wildcard
Option
Select the check box to enable DynDNS Wildcard.
Enable off line
option
This option is available when CustomDNS is selected in the DDNS Type field.
Check with your Dynamic DNS service provider to have traffic redirected to a URL
(that you can specify) while you are off line.
IP Address Update Policy
Use WAN IP
Address
Select this option to update the IP address of the host name(s) to the WAN IP
address.
Dynamic DNS
server auto
detect IP
Address
Select this option only when there are one or more NAT routers between the P-
79X and the DDNS server. This feature has the DDNS server automatically detect
and use the IP address of the NAT router that has a public IP address.
Note: The DDNS server may not be able to detect the proper IP address if there is
an HTTP proxy server between the P-79X and the DDNS server.
To Next Page
Loading...
