Chapter 19 Remote Management
P-79X Series User’s Guide
191
Figure 118 Advanced > Remote MGMT > CWMP
The following table describes the labels in this screen.
Table 80 Advanced > Remote MGMT> CWMP
LABEL DESCRIPTION
Enable Select On for the P-79X to send periodic inform via TR-069 on the WAN.
Otherwise, select Off.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS Username Enter the TR-069 user name for authentication with the auto-configuration
server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration server.
Enable Periodic
Inform
Select On for the P-79X to send periodic inform via TR-069 on the WAN.
Otherwise, select Off.
Periodic Inform
Interval
Enter the time interval (in seconds) at which the P-79X sends information to the
auto-configuration server.
Connection
Request
Username
Enter the connection request user name.
When the ACS makes a connection request to the P-79X, this user name is used
to authenticate the ACS.
Connection
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the P-79X, this password is used to
authenticate the ACS.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
