Chapter 2 Installing the Utility
PLA-401 v3 User’s Guide
23
3 The Setup utility runs automatically. Click Yes or Next to continue through the
initial screen. Click Cancel only if you want to abort the installation.
Figure 6 InstallShield Wizard Start Screen
4 If you want the utility to be only available to the currently logged in user, select
Only for me(...). Otherwise, click Everyone to allow all users to use the
configuration utility. Click Next to install the utility to the default folder, or click
Browse to specify a different location on your computer.
Figure 7 Install Destination Folder
Note: You can also click Disk Cost to know how much available disk space you have
in the hard drives found in your computer.
To Next Page
Loading...
