ZyXEL Communications PM7300-T0 - Hardware and Device Components; 2.1 Device Panels and Indicators

PM7300-T0 User’s Guide
11
CHAPTER 2
Hardware
2.1 Device Panels
The following show the panels on the PM7300-T0.
Figure 2 Front Panel
2.1.1 LEDs (Lights)
The LED indicators are located on the top panel.
Table 2 PM7300-T0 LED Behavior
LED COLOR STATUS DESCRIPTION
Power Green On The PM7300-T0 is ready for use.
Blinking The PM7300-T0 is booting.
Off The PM7300-T0 is not receiving power.
Red On There is a system failure.
Blinking The firmware upgrade is in progress.