PM7300-T0 User’s Guide
40
CHAPTER 10
System
10.1 Overview
On the System screen, you can name your PM7300-T0 (Host) and give it an associated domain name for
identification purposes.
10.2 The System Screen
Click Maintenance > System to open the following screen. Assign a unique name to the PM7300-T0 so
it can be easily recognized on your network. You can use up to 30 characters, including spaces.
Figure 27 Maintenance > System
The following table describes the labels on this screen.
Table 19 Maintenance > System
LABEL DESCRIPTION
Host Name Type a host name for your PM7300-T0. Enter a descriptive name of up to 30 alphanumeric
characters, including spaces, underscores, and dashes.
Domain Name
Type a Domain name for your host PM7300-T0 for identification purpose. Enter a descriptive
name of up to 30 alphanumeric characters. The following special characters listed in the
brackets ["`<>^$|&;\/:*?'] are not allowed in the Domain Name.
Apply Click Apply to save your changes.
Cancel Click Cancel to abandon this screen without saving.
To Next Page
Loading...
