Chapter 7 Monitor
ZyWALL/USG Series User’s Guide
202
The following table describes the fields in the previous screen.
7.15 Wireless
Wireless contains AP information, Station Info and Detected Device menus.
7.15.1 Wireless AP Information: AP List
The AP Information menu contains AP List and Radio List screens. Click Monitor > Wireless >
AP Information to display the AP List screen.
Figure 168 Monitor > Wireless > AP List
Table 57 Monitor > System Status > Ethernet Neighbor
LABEL DESCRIPTION
Local Port (Description) This field displays the port of the ZyWALL/USG, on which the neighboring device is
discovered.
For ZyWALL/USGs that support Port Role, if ports 3 to 5 are grouped together
and there is a connection to P5 only, the ZyWALL/USG will display P3 as the
interface port number (even though there is no connection to that port).
Model Name This field displays the model name of the discovered device.
System Name This field displays the system name of the discovered device.
Firmware Version This field displays the firmware version of the discovered device.
Port (Description) This field displays the first internal port on the discovered device. Internal is an
interface type displayed in the Network > Interface > Ethernet > Edit screen.
For example, if P1 and P2 are WAN, P3 to P5 are LAN, and P6 is DMZ, then
ZyWALL/USG will display P3 as the first internal interface port number.
For ZyWALL/USGs that support Port Role, if ports 3 to 5 are grouped together
and there is a connection to P5 only, the ZyWALL/USG will display P3 as the first
internal interface port number (even though there is no connection to that port).
IP Address This field displays the IP address of the discovered device.
MAC Address This field displays the MAC address of the discovered device.
Refresh Click this button to update the information in the screen.
To Next Page
Loading...
