Chapter 29 IPSec VPN
ZyWALL/USG Series User’s Guide
557
29.4.2 VPN Concentrator Screen
The VPN Concentrator summary screen displays the VPN concentrators in the ZyWALL/USG. To
access this screen, click Configuration > VPN > IPSec VPN > Concentrator.
Figure 381 Configuration > VPN > IPSec VPN > Concentrator
Each field is discussed in the following table. See Section 29.4.3 on page 557 for more information.
29.4.3 The VPN Concentrator Add/Edit Screen
Use the VPN Concentrator Add/Edit screen to create or edit a VPN concentrator. To access this
screen, go to the VPN Concentrator summary screen (see Section 29.4 on page 556), and click
either the Add icon or an Edit icon.
Table 212 Configuration > VPN > IPSec VPN > Concentrator
LABEL DESCRIPTION
IPv4/IPv6
Configuration
Choose to configure for IPv4 or IPv6 traffic.
Add Click this to create a new entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
# This field is a sequential value, and it is not associated with a specific concentrator.
Name This field displays the name of the VPN concentrator.
Group Members These are the VPN connection policies that are part of the VPN concentrator.
To Next Page
Loading...
