Chapter 44 Log and Report
ZyWALL/USG Series User’s Guide
891
44.3.5 Log Category Settings Screen
The Log Category Settings screen allows you to view and to edit what information is included in
the system log, USB storage, e-mail profiles, and remote servers at the same time. It does not let
you change other log settings (for example, where and how often log information is e-mailed or
remote server names). To access this screen, go to the Log Settings Summary screen (see
Section 44.3.1 on page 880), and click the Log Category Settings button.
# This field is a sequential value, and it is not associated with a specific address.
Log
Category
This field displays each category of messages. It is the same value used in the Display and
Category fields in the View Log tab. The Default category includes debugging messages
generated by open source software.
Selection Select what information you want to log from each Log Category (except All Logs; see
below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this
category
enable normal logs and debug logs (yellow check mark) - log regular information, alerts,
and debugging information from this category
OK Click this to save your changes and return to the previous screen.
Cancel Click this to return to the previous screen without saving your changes.
Table 377 Configuration > Log & Report > Log Setting > Edit (Remote Server) (continued)
LABEL DESCRIPTION
To Next Page
Loading...
