ZyXEL Communications USG40 - Using Upnp in Windows XP Example

Chapter 16 UPnP
ZyWALL/USG Series User’s Guide
413
16.4.2 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the ZyWALL/USG.
Make sure the computer is connected to a LAN port of the ZyWALL/USG. Turn on your computer
and the ZyWALL/USG.
16.4.2.1 Auto-discover Your UPnP-enabled Network Device
1 Click start and Control Panel. Double-click Network Connections. An icon displays under
Internet Gateway.
2 Right-click the icon and select Properties.
Figure 284 Network Connections
3 In the Internet Connection Properties window, click Settings to see the port mappings there
were automatically created.
Figure 285 Internet Connection Properties
4 You may edit or delete the port mappings or click Add to manually add port mappings.