ZyWALL/USG Series User’s Guide
71
CHAPTER 4
Easy Mode
4.1 Overview
Welcome to the Easy Mode screens. This mode contains wizards that help you configure the
ZyWALL/USG, links to portals and the advanced menus in Expert Mode.
Use the Easy Mode screens if you have a relatively simple network environment with one WAN
(WAN1) and one LAN (LAN1) connections. If your ZyWALL/USG has two WAN ports, use WAN1 as
the WAN connection. If you use WAN2 as the WAN connection or want to use both WAN ports, then
please use the Expert Mode screens.
If you prefer to start directly with the advanced screens, then simply click Expert Mode and
select the Expert Mode option.
Figure 49 Switch Modes
4.1.1 Wizards and Links
In the wizards, click the question mark on the right to display or hide the help. Click Next > to
continue to the following screen, < Back to return to the previous screen and Exit or X (top
right) to close the wizard screen without saving any changes.
The following are the Easy Mode wizards and links.
Figure 50 Easy Mode Wizards and Links
To Next Page
Loading...
