Chapter 3 Hardware, Interfaces and Zones
ZyWALL/USG Series User’s Guide
62
Figure 44 USG40 / USG40W Rear Panel
Figure 45 USG20-VPN / USG20W-VPN Rear Panel
Figure 46 USG60 / USG60W Rear Panel
Figure 47 USG2200-VPN Rear Panel
The following table describes the items on the rear panel.
Table 15 Rear Panel Items
LABEL DESCRIPTION
Console You can use the console port to manage the ZyWALL/USG using CLI commands. You will be
prompted to enter your user name and password. See the Command Reference Guide for
more information about the CLI.
When configuring using the console port, you need a computer equipped with
communications software configured to the following parameters:
• Speed 115200 bps
•Data Bits 8
• Parity None
•Stop Bit 1
• Flow Control Off
Power Use the included power cord to connect the power socket to a power outlet. Turn the power
switch on if your ZyWALL/USG has a power switch.
Lock Attach a lock-and-cable from the Kensington lock (the small, metal-reinforced, oval hole)
to a permanent object, such as a pole, to secure the ZyWALL/USG in place.
Fan The fans are for cooling the ZyWALL/USG. Make sure they are not obstructed to allow
maximum ventilation.
To Next Page
Loading...
