Chapter 5 Log
VMG4005-B50B User’s Guide
30
5.2 System Log
Use the System Log screen to see the system logs. Click System Monitor > Log to open the System Log
screen.
Figure 13 System Monitor > Log > System Log
The following table describes the fields in this screen.
6 Informational: The syslog contains an informational message.
7 Debug: The message is intended for debug-level purposes.
Table 8 Syslog Severity Levels
CODE SEVERITY
Table 9 System Monitor > Log > System Log
LABEL DESCRIPTION
Level Select a severity level from the drop-down list box. This filters search results according to the
severity level you have selected. When you select a severity, the VMG searches through all logs
of that severity or higher.
Category Select the type of logs to display.
Clear Log Click this to delete all the logs.
Refresh Click this to renew the log screen.
Export Log Click this to export the selected log(s).
# This field is a sequential value and is not associated with a specific entry.
Time This field displays the time the log was recorded.
Facility The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Level This field displays the severity level of the log that the device is to send to this syslog server.
Category This field displays the type of the log.
Messages This field states the reason for the log.
To Next Page
Loading...
