VMG4005-B50B User’s Guide
38
CHAPTER 9
User Account
9.1 Overview
In the User Account screen, you can view the settings of the “admin” and other user accounts that you
used to log in the VMG.
9.2 User Account
Click Maintenance > User Account to open the following screen.
Figure 18 Maintenance > User Account
The following table describes the labels in this screen.
Table 14 Maintenance > User Account
LABEL DESCRIPTION
Add New
Account
Click this button to add a new user account.
# This is the index number
Active This field indicates whether the user account is active or not.
Clear the check box to disable the user account. Select the check box to enable it.
User Name This field displays the name of the account used to log into the VMG Web Configurator.
Retry Times This field displays the number of times consecutive wrong passwords can be entered for this
account. 0 means there is no limit.
Idle Timeout This field displays the length of inactive time before the VMG will automatically log the user out
of the Web Configurator.
Lock Period This field displays the length of time a user must wait before attempting to log in again after a
number of consecutive wrong passwords have been entered as defined in Retry Times.
Group This field displays whether this user has Administrator or User privileges.
Modify Click the Edit icon to configure the entry.
Click the Delete icon to remove the entry.
To Next Page
Loading...
