Chapter 14 Backup/Restore
VMG4005-B50B User’s Guide
53
Figure 31 Reset Warning Message
Figure 32 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your VMG. Refer to
Section 1.4.4 on page 10 for more information on the RESET button.
14.3 Reboot
System restart allows you to reboot the VMG remotely without turning the power off. You may need to
do this if the VMG hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the VMG reboot. This does not affect the VMG's
configuration.
Figure 33 Maintenance > Reboot
To Next Page
Loading...
