VMG4005-B50B User’s Guide
47
CHAPTER 12
Log Setting
12.1 Overview
You can configure where the VMG sends logs and which logs and/or immediate alerts the VMG records
in the Logs Setting screen.
12.2 Log Settings
To change your VMG’s log settings, click Maintenance > Logs Setting. The screen appears as shown.
Figure 24 Maintenance > Logs Setting
The following table describes the fields in this screen.
Table 20 Maintenance > Logs Setting
LABEL DESCRIPTION
Syslog Setting
Syslog Logging The VMG sends a log to an external syslog server. Select Enable to enable syslog logging.
Mode Select the syslog destination from the drop-down list box.
If you select Remote, the log(s) will be sent to a remote syslog server. If you select Local File, the
log(s) will be saved in a local file. If you want to send the log(s) to a remote syslog server and
save it in a local file, select Local File and Remote.
To Next Page
Loading...
