VMG4005-B50B User’s Guide
49
CHAPTER 13
Firmware Upgrade
13.1 Overview
This chapter explains how to upload new firmware to your VMG. You can download new firmware
releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your device’s
performance.
Only use firmware for your device’s specific model. Refer to the label on
the bottom of your VMG.
13.2 Firmware
Click Maintenance > Firmware Upgrade to open the following screen. The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot.
Do NOT turn off the VMG while firmware upload is in progress!
Figure 25 Maintenance > Firmware Upgrade
To Next Page
Loading...
