Chapter 13 Firmware Upgrade
VMG4005-B50B User’s Guide
50
The following table describes the labels in this screen. After you see the firmware updating screen, wait
two minutes before logging into the VMG again.
Figure 26 Firmware Uploading
The VMG automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 27 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
Table 21 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
Upgrade Firmware
Restore Default
Settings After
Firmware Upgrade
Click the check box to have the VMG automatically reset itself after the new firmware is
uploaded.
Current Firmware
Version
This is the present Firmware version and the date created.
File Path Type in the location of the file you wasn’t to upload in this field or click Browse to find it.
Browse Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take up to two minutes.
To Next Page
Loading...
