Chapter 1 Getting to Know Your Switch
XGS2210 Series User’s Guide
21
4.30 is the firmware trunk version, AAZJ identifies the XGS2210-28 and .0 is the first release of trunk version
4.30.
The XGS2210-28HP and XGS2210-52HP come with a Power-over-Ethernet (PoE) feature. The XGS2210-
28HP and XGS2210-52HP support the IEEE 802.3at High Power over Ethernet (PoE) standard and IEEE
802.3af PoE standard.
Key feature differences between Switch models are as follows. Other features are common to all
models.
The following table describes the PoE features of the Switch by model.
This section shows a few examples of using the Switch in various network environments.
1.1.1 Backbone Application
The Switch is an ideal solution for small networks where rapid growth can be expected in the near future.
The Switch can be used standalone for a group of heavy traffic users. You can connect computers and
servers directly to the Switch’s port or connect other switches to the Switch.
In this example, all computers can share high-speed applications on the server. To expand the network,
simply add more networking devices such as switches, routers, computers, print servers etc.
Table 2 Models and Firmware Versions
SWITCH MODEL FIRMWARE VERSION
XGS2210-28 4.30(AAZJ.0) and later
XGS2210-28HP 4.30(AAZK.0) and later
XGS2210-52 4.30(AAZL.0) and later
XGS2210-52HP 4.30(AAZM.0) and later
Table 3 Models and PoE Features
SWITCH MODEL POE FEATURES
XGS2210-28HP
XGS2210-52HP
IEEE 802.3af PoE
IEEE 802.3 at High Power over Ethernet (PoE)
Power management mode - Classification
Power management mode - Consumption
To Next Page
Loading...
