XGS2210 Series User’s Guide
480
CHAPTER 53
Routing Table
53.1 Overview
The routing table contains the route information to the network(s) that the Switch can reach.
53.2 Viewing the Routing Table Status
Use this screen to view routing table information. Click Management > Routing Table in the navigation
panel to display the screen as shown.
Figure 380 Management > Routing Table
The following table describes the labels in this screen.
Table 220 Management > Routing Table
LABEL DESCRIPTION
Index This field displays the index number.
Destination This field displays the destination IP routing domain.
Gateway This field displays the IP address of the gateway device.
Interface This field displays the IP address of the Interface.
Metric This field displays the cost of the route.
Type This field displays the method used to learn the route.
STATIC - added as a static entry.
LOCAL - added as a local entry.
Uptime This field displays how long the route has been running since the Switch learned the route and
added an entry in the routing table.
To Next Page
Loading...
