XGS2210 Series User’s Guide
424
CHAPTER 44
Maintenance
44.1 Overview
This chapter explains how to configure the screens that let you maintain the firmware and configuration
files.
44.1.1 What You Can Do
• Use the Maintenance screen (Section 44.2 on page 424) to erase running configuration, save a
configuration file or restart the Switch.
• Use the Firmware Upgrade screen (Section 44.6 on page 428) to upload the latest firmware.
• Use the Restore Configuration screen (Section 44.7 on page 430) to upload a stored device
configuration file.
• Use the Backup Configuration screen (Section 44.8 on page 431) to save your configurations for later
use.
• Use the Tech-Support screen (Section 44.9 on page 431) to create reports for customer support if
there are problems with the Switch.
44.2 The Maintenance Screen
Use this screen to manage firmware and your configuration files. Click Management > Maintenance in
the navigation panel to open the following screen.
Figure 331 Management > Maintenance (Standalone mode)
To Next Page
Loading...
