2N Access Unit M - IP Address Retrieval; Firmware Update; Device Restart

TIP
It is recommended that a password is used that is difficult to break. It is not recommended
that names, places or things, especially those closely related to the user, are used in the
password.
For increased password security, it is recommended that:
• the random password generator is used,
• the password length is 12 characters at least,
• various characters from different character sets are combined (small/capital letters, digits,
special characters, etc.).
IP Address Retrieval
To retrieve the device IP address, take the following steps:
• Use the freely accessible 2N Network Scanner.
• Use hardware (RESET button).
Firmware Update
We recommend that the firmware is also updated during the 2N Access Unit M installation. Refer to 2N.com
for the latest FW version.
Update firmware via the web configuration interface in System > Maintenance, refer to the device Configura-
tion Manual.
Once the firmware is uploaded successfully, the device is restarted automatically.
TIP
You can make bulk updates for multiple devices via 2N Access Commander.
Device Restart
To restart the device choose one of the following options:
• using the RESET button,
• via the web configuration interface.
NOTE
The device restart does not result in any change in the configuration settings.
Restart Using RESET Button
The RESET button helps you reset the factory default values, restart the device, retrieve the device IP
address and switch the IP address static/dynamic mode. Press the button shortly (< 1 s) to restart the
system without changing configuration.
Brief Guidelines
39