To Next Page

To Previous Page

Product Versions

Part No. 9161121

Axis Part No. 02909-001

2N Access Unit M 13.56 MHz, NFC ready

Combining an access reader and a controller, the device is used for

access control inside and outside of buildings.

The device is used for reading RFID cards in the 13.56 MHz bandwidth

with the NFC support.

It is a 3m LAN cable version.

Supported RFID cards 13.56 MHz:

• ISO14443A (MIFARE Classic, MIFARE Plus, MIFARE Mini, MIFARE

Ultralight, MIFARE DESFire CSN only)

• PicoPass (HID iClass CSN, Picopass)

• FeliCa (Standard, Lite)

• ST SR (SR, SRI, SRIX)

• Mobile Key

Part No. 9161141

Axis Part No. 02910-001

2N Access Unit M RFID – 125 kHz, 13.56 MHz, NFC

Combining an access reader and a controller, the device is used for

access control inside and outside of buildings.

The device is used for reading RFID cards in the 125 kHz and 13.56

MHz bandwidths with the NFC support.

It is a 3m LAN cable version.

Supported RFID cards 125 kHz:

• EM4x02

• NXP HiTag2