2N Access Unit M - Product Description; Basic Features

Product Description
In this section, we introduce the 2N Access Unit M product, outline its application options and highlight the
advantages following from its use.
Basic Features
2N Access Unit M is an elegant and reliable IP system equipped with a number of useful functions.
2N Access Unit M is designed as a robust, mechanically resistant access system, which withstands any
weather conditions without requiring additional accessories.
2N Access Unit M is a single-module access system available in several versions. All the versions include
an integrated card reader module, which helps control access using an RFID card. With additional software
settings, functions other than the door lock switch can be RFID card controlled too.
The 2N Access Unit M keypad version helps you control the electric lock switch by entering a valid numeric
code via the numeric keypad. With additional software settings, functions other than the door lock can be
RFID card controlled too.
The 2N Access Unit M Bluetooth version helps you control the lock switch using the 2N Mobile Key
application installed in your smartphone. 2N Access Unit M is designed as a robust,
The installation of 2N Access Unit M is very easy. All you have to do is connect the system to your LAN via
a mains cable. Feed the device from a 12 V power supply or your PoE supporting LAN.
Use a PC equipped with any internet browser to configure 2N Access Unit M. extensive access system
installations easily.
Advantages of Use 2N Access Unit M:
• Elegant mullion design,
• Cover rating,
• Variable installation options (flush mounting into brick/plasterboard walls, surface installation, door frame
mounting),
• Integrated electric lock switches with wide setting options,
• Integrated RFID card reader module,
• Bluetooth module version or backlit touch keypad,
• Configuration using web interface,
• HTTP server for API configuration,
• SNTP client for server time synchronization,
• SMTP client for e-mail sending,
• TFTP/HTTP client for automated configuration and firmware update,
• LAN (PoE) or external 12 V power supply.
Product Description
4