2N Access Unit M - Accessories

Part No. 9161151
Axis Part No. 02911-001
2N Access Unit M Bluetooth & RFID – 125 kHz, 13.56 MHz, NFC
Combining an access reader, a touch keypad and a controller, the
device is used for access control inside and outside of buildings.
The device is used for reading RFID cards in the 125 kHz and 13.56
MHz bandwidths with the NFC support.
It is a 3m LAN cable version.
Supported RFID cards 125 kHz:
• EM4x02
• NXP HiTag2
Part No. 9161161
Axis Part No. 02912-001
2N Access Unit M Touch keypad & RFID – 125 kHz, 13.56 MHz, NFC
Combining an access reader, a touch keypad and a controller, the
device is used for access control inside and outside of buildings.
The device is used for reading RFID cards in the 125 kHz and 13.56
MHz bandwidths with the NFC support.
It is a 3m LAN cable version.
Supported RFID cards 125 kHz:
• EM4x02
• NXP HiTag2
Supported RFID cards 13.56 MHz:
• ISO14443A (MIFARE Classic, MIFARE Plus, MIFARE Mini, MIFARE
Ultralight, MIFARE DESFire CSN only)
• PicoPass (HID iClass CSN, Picopass)
• FeliCa (Standard, Lite)
• ST SR (SR, SRI, SRIX)
• Mobile Key
Accessories
Accessories for Installation
2N Access Unit M is designed for outdoor applications and requires no additional roof.
Choose the proper a mounting box depending on your particular installation needs.
Product Description
6