2N Indoor View - Page 37

2N® Indoor View User Manual
37 / 132
CallSessionStateChanged Event describing the call direction/state, address,
session number and call sequence number.
CallStateChanged Indicates the call direction (incoming, outgoing) and
opponent / SIP account identification at a call state
change (ringing, connected, terminated).
DeviceState Device state indication, startup of the device, for
example.
DtmfEntered DTMF code received in call or off call locally.
DtmfSent DTMF code sent in call or off call locally.
InputChanged Signalsa state change of the logic input.
KeyPressed Generated whenever a button is pressed (numeric
keypad digits are 0, 1, 2..., 9 and quickdial buttons are
%1, %2 ...).
KeyReleased Generated whenever a button is released (numeric
keypad digits are 0, 1, 2..., 9 and quickdial buttons are
%1, %2 ...).
LoginBlocked Event generated after 3 wrong logins to the web
interface. Contains information about IP address.
RegistrationStateChanged Change of the SIP Proxy registration state.