2N Indoor View - Page 45

2N® Indoor View User Manual
45 / 132
This parameter helps you set time profiles within a week period. A profile is active when it
matches the set intervals.
If a day is marked as holiday (refer toDirectory → Holidays), the last table row (Holiday) is
applied regardless of the day in a week.
Make sure that the real time settings are correct (refer to the Date and Time subsection) to make
this function work properly.
•
•
Note
You can set any number of intervals within a day: 8:00–12:00, 13:00–17:00, 18:00–
20:00, e.g.
To make a profile active for the whole day, enter one day-covering interval: 00:00–
24:00.
