2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 72/104
UploadSnapshotToFtp
The block defines the action that sends a camera snapshot to UploadSnapshotToFtp
the FTP server. The FTP and snapshot parameters are configured in the Services /
Streaming / FTP menu.
Parameters
– define the event to launch this action.Event
– define the condition to be met for the action to be executed. This Condition
parameter is optional.
– define the video source for the picture to be uploaded to the FTP Source
server.
Valid values:
– the video source is chosen according to the Hardware / auto
Camera / Common Setting / Default Video Source settings.
– internal camerainternal
– external camera.external
The parameter is optional; the default value is a .uto
Example
Upload a picture from the camera to the FTP server if the event defined on row 2
arises:

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple