2N IP series Automation Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 73/104
StartAutoUpdate
The block defines the action that runs firmware and configuration StartAutoUpdate
auto update. The auto provisioning parameters are configured in the System / Auto
Provisioning menu.
Parameters
– define the event to launch this action.Event
– define the condition to be met for the action to be executed. This Condition
parameter is optional.
Send an email to the email address set to user2@domain_name if event 1 arises:

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple