1
WX SWITCH OVERVIEW
A 3Com Wireless Switch (WX) provides mobility and authentication,
authorization, and accounting (AAA) services for wireless or wired users.
A WX switch also controls the operation of 3Com Managed Access Point
(MAP) access points, which control and manage IEEE 802.11 operation
over the air.
WARNING: Installation must be performed by qualified service personnel
only. Read and follow all warning notices and instructions marked on the
product or included in the documentation.
MAP Model
Numbers
Table 3 lists the MAP switch model numbers.
Table 3 MAP Switch Model Numbers
Model Port Configuration Power Supply Configuration
WX1200 Eight 10/100 Ethernet ports, six of
which support PoE
One 100-120 VAC / 200-240 VAC
autosensing AC power supply
WX4400 Four dual-interface gigabit Ethernet
ports. Each port has a 1000BASE-TX
copper interface and a Gigabit
interface converter (GBIC) slot for
insertion of a 1000BASE-SX or
1000BASE-LX fiber-optic interface.
Two 100-120 VAC / 200-240 VAC
autosensing AC power supplies
To Next Page
Loading...
