12 CHAPTER 1: WX SWITCH OVERVIEW
Hardware Features The following sections describe the WX hardware features.
WX1200 Switch A WX1200 switch is one RU high and can be installed in a standard
48.26-cm (19-inch) equipment rack or on a tabletop. Figure 1 shows the
external hardware features of a WX1200 switch.
Figure 1 WX1200 Switch—Front Panel Control Features
The rear of the switch contains a label with the serial ID, MAC address,
and other identifying information.
WX4400 Switch A WX4400 switch is two rack units (RUs) high and can be installed in a
standard 48.26-cm (19-inch) equipment rack or on a tabletop. Figure 2
shows a front view of a WX4400 switch and identifies the external
hardware features.
Power
supply
Power
supply LED
10/100 Ethernet
uplink ports
10/100 and
MAP/PoE LEDs
10/100 and MAP
Ethernet ports
Serial
console port
To Next Page
Loading...
