Configuring User Authentication 83
Figure 11 Offload User Authentication
Configuring RADIUS Servers for Offload Authentication
(See “Configuring RADIUS Servers for Pass-Through Authentication” on
page 79.) The commands for configuring a RADIUS server group are
exactly the same for offload and pass-through user authentication.
Configuring the Authentication Protocol for Offload
Authentication
To configure the authentication protocol for 802.1X users, use the
following command. A user glob represents a set of users.
set authentication dot1x {ssid ssid-name | wired} user-glob
[bonded] protocol method1 [method2] [method3] [method4]
WX
s
wi
t
c
h
Router
User A
Certificate
authority
RADIUS
server
MS-CHAP-V2
User
A
TLS
Server
certificate
Certificate
authority
certificate
M
A
P
M
A
P
To Next Page
Loading...
