Need help?Do you have a question about the 3Com III and is the answer not in the manual?
Covers opening the package, checking contents, and physically installing the adapter into an EISA slot.
Steps to verify the adapter is correctly recognized and installed within the Windows 95 operating system.
Details on connecting the adapter using thin Ethernet, twisted-pair, or external transceivers.
Outlines the procedures for configuring the adapter using EISA utilities and the EtherDisk diskette.
Instructions for installing NetWare ODI drivers, covering single and multiple adapter scenarios.
Step-by-step guide for installing network drivers when using Windows 95.
Introduces the diagnostic tests available on the EtherDisk for identifying adapter faults.
Steps to launch the configuration and diagnostic program from the EtherDisk.
Explains how to execute specific test groups (physical, loopback, network) for problem diagnosis.
Details on performing loopback tests (Group 2) and network echo tests (Group 3).
Guidance on interpreting test results and troubleshooting common issues that cause test failures.
Outlines warranty periods and terms for hardware products like network adapters.
To Next Page
General