3Com III - Performing Troubleshooting and Diagnostic Tests

5
PERFORMING
TROUBLESHOOTING AND
DIAGNOSTIC TESTS
This chapter explains how to isolate and solve 3C592 EISA
adapter problems. Figure 5-1 illustrates how the procedures in
this chapter might be used.
Make sure that the adapter is correctly installed. (See
Chapter 2 for installation instructions.)
Figure 5-1 Troubleshooting Overview
1
Access DOS.
2
Start the diagnostic program.
3
Configure the diagnostic tests.
(optional)
4
Run the diagnostic tests.
5
Resolve problems.
(if required)
6
Call technical support if
problems persist.