3Com III - Configuring the Adapter

3
CONFIGURING THE
ADAPTER
This chapter explains how to configure the 3C592 EISA
adapter using the EISA configuration diskette that came
with your computer and the EtherDisk diskette supplied with
the adapter. The configuration process is shown in Figure 3-1.
Figure 3-1 Adapter Configuration Overview
1
2
Configure the adapter using the
EISA configuration utility.
3
Copy the .CFG file from
the
EtherDisk diskette.
Change software option settings.
(optional)
4
Go to Chapter 4,
“Loading Network Drivers.”