3Com III - Multiple Adapter Option Configuration; Changing Adapter Options

Software Option Settings 3-9
Figure 3-4 Multiple Adapter Option Configuration
Figure 3-5 Changing Adapter Options
Select Adapter
Select Cancel
Select the adapter to be configured and/or tested.
[ENTER]=<Select>
[Alt]+<Highlighted Key>=Execute Function [
↑↓ ]=Scroll
[TAB]=Next Field [SHIFT+TAB]=Previous Field [F1]=Help [ESC]=<Quit>
Installed Adapters
3Com 3C592-COMBO in Slot 2: Node Address = 0060BC001358
3Com 3C592-TPO in Slot 3: Node Address = 0060BC001368
InstallQuit View Select F1=HelpTest
Configuration and Diagnostic Program
(C) Copyright 1995, 3Com Corporation. All Rights Reserved
[ENTER]=<Auto Configure> Automatically Configures the Adapter
[Alt]+<Highlighted Key>=Execute Function
[TAB]=Next Field [SHIFT+TAB]=Previous Field [F1]=Help [ESC]=Cancel
Configuration and Diagnostic Program
InstallQuit View Select F1=HelpTest
CancelOKModify File OptionsAuto Configure
Adapter Configuration
Adapter Configuration
Network Driver Optimization
Full Duplex
Boot PROM
Media Type
I/O Port Address
Interrupt Level
Normal
Disabled
Disabled (EISA)
Auto Select
1000h (EISA)
5 (EISA)
(C) Copyright 1995, 3Com Corporation. All Rights Reserved