Features 1-3
■ Auto Select Media Type capability, which enables drivers to
automatically detect the type of media connector that
connects the adapter to the network
■ Network management support through Transcend
PC Link
SmartAgent
software
■ The Desktop Management Interface (DMI), which increases
the manageability of PCs by standardizing how information
relating to PCs is made available and how it is accessed
■ LED notification of link integrity and polarity reversal
The procedures described in this guide are shown in
Figure 1-2.
Figure 1-2 Procedure Overview
1
Install the adapter in an EISA slot.
2
Configure the Adapter using the
EISA configuration utility.
3
Load network drivers.
(NetWare or other)
4
Troubleshoot the adapter.
(optional)
To Next Page
Loading...
