3Com III - Page 6

Locating the Network Drivers 4-2
Accessing DOS 4-2
Loading NetWare ODI Drivers 4-3
One Adapter in a Client 4-3
AutoLink Requirements 4-4
AutoLink Installation 4-4
Multiple Adapters in a Client 4-7
Finding the Adapter’s Slot Number 4-9
One Adapter in a Server 4-10
Driver Installation with NetWare 4-10
Multiple Adapters in a Server 4-11
Finding the Adapter’s Port Address for Multiple Adapters 4-12
Driver Installation with NetWare 4-13
Loading Windows 95 Drivers 4-14
Loading Drivers in Non-NetWare Environments 4-15
NDIS Drivers 4-15
Additional Drivers 4-16
Using Transcend PC Link SmartAgent Software 4-16
Desktop Management Interface 4-17
5
P
ERFORMING
T
ROUBLESHOOTING AND
D
IAGNOSTIC
T
ESTS
Troubleshooting with the Diagnostic Tests 5-2
Starting the Diagnostic Program 5-3
Running the Group 1 Tests 5-4
Running the Group 2 Test 5-5
Assembling a Loopback Plug 5-5
Starting the Group 2 Test 5-5
Running the Group 3 Test 5-6
Setting Up an Echo Server 5-6
Starting the Group 3 Test 5-7
Getting Help If a Test Fails 5-8
Changing the Test Setup 5-10
Miscellaneous Checks 5-11
Link Beat LED 5-11
A
S
PECIFICATIONS
Adapter Specifications A-1
RJ-45 Connector Pin Assignments A-2
AUI Connector Pin Assignments A-2
Cable Requirements A-3