3DHISTECH Pannoramic 1000 - Using Profiles; Profile Settings Configuration

Pannoramic 1000 1.2 – User’s Guide 5 Using Profiles
5 Using Profiles
Note:
Saved profile settings cannot be applied if using a different type of
Pannoramic scanner.
The following settings are saved in a profile:
Scan Settings
• Grabbing method
• Multilayer
• Output resolution
• Image settings
◦ Format
◦ Bit-depth
◦ Quality
• Focusing
◦ Focus distance
• Preview grabbing mode
• Preview threshold
◦ Use of automatic threshold specimen
◦ Use of specimen threshold value
◦ Use of marker pen threshold and specimen threshold values
• Use of removing specks according to the set value (ON/OFF)
• Use dilation per FOV
• Filling of holes (ON/OFF)
• Preview areas:
◦ Coverslip area
◦ Selection area
◦ Custom area
March 19, 2019 – Rev. 2 3DHISTECH Ltd. 46(78)