78-8130-6151-8-E 33
Creating/Editing Templates for
3M
™
EMS iD Markers
In the User Template screen, the operator can create and modify templates to program
iD markers.
Creating New Templates
Menu [6] + Data/Templat [SK] + User Templat [SK]
1. Select Create New by pressing the up/down
arrows [SK].
2. Press View/Edit [SK].
3. Name the template.
4. Press Modify [SK] to manually enter the name
of the template.
5. Select UserEdit.
6. Press OK [5]
7. Move the boxed cursor by pressing the left/right
arrows [SK] or up/down arrow [SK] to move the
cursor up or down.
8. Press Select [SK] to enter the alphanumeric
character.
− Entry will appear at the top of the screen.
9. Press OK [5] when entry is complete.
10. Press Exit [5] to cancel.
Note: To clear the previous field entry, select
the ‘back arrow’ with the cursor and delete the
previous entry.
To Next Page
Loading...
