12
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
ATM Transport Setup
10. Use the blue keys to enter
the VCI.
11. Press
OK
or to see
previous screens. Multiple
presses will take you to the
Network Setup screen.
WAN Setup
The VDSL2 Service Module can be configured for four different
transport types: EoA (
Ethernet over ATM), IPoA (Internet
Protocol over ATM), PPPoE (Point to Point Protocol over
Ethernet) and PPPoA (Point to Point Protocol over ATM).
PPPoE & PPPoA require a username and password.
The module can also use two different address modes: DHCP
and Static IP. Static IP requires entering the local IP, subnet
mask and default gateway information.
To Next Page
Loading...
Need help?
General
