35
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
Tests
Test functions include Ping and Browse. These operations
require entering the VDSL2 Service Module’s Wide Area
Network (WAN) and Local Area Network (LAN) information
and Ping settings.
The Tests menu is available from the Tests button on the DSL
DataLink screen, or the Tests button on the Ethernet screen.
Tests>Hook-Up
RED
BLK
Ring 1Ring 1
Tip 1Tip 1
RJ-45 AdapterRJ-45 Adapter
OROR
Tests>Setup
1. Press the red
key to
power up the tester.
2. Complete the network
setups (page 9) if necessary.
3. Press
xDSL
to view the
DSL DataLink screen or
RJ-45
to view the Ethernet
screen, depending on where
you are connecting from.
To Next Page
Loading...
