37
3M™ Dynatel™ Advanced Modular System 965AMS VDSL2 Service Module User’s Guide
Ping
Ping is used to send request packets to a target host. The test
will then count the response packets and the time delay of the
packets. The default target is Yahoo.com.
Ping settings are entered in the the ping setup (page 20).
PING>Operation
1. From the Tests screen, use
the up and down arrow keys
to select Ping. Press
OK
to
start the test.
2. Results screen.
Press
to return to the
Tests screen.
To Next Page
Loading...
