3M SCP725 - Input Menu

23
Operator’s Guide
3M
™
Super Close Projection System SCP725
© 3M 2011. All Rights Reserved.
ENGLISH
Input Menu
The Input Menu, shown below, is used to select the desired computer or video input source to be displayed on
the projector.
Input Input Source: Computer 1
Computer 1 / Component 1
Computer 2 / Component 2
RCA Video
S-Video
HDMI
✓
Feature Description
Main Input Select the Input source to be displayed on the projector.
1. Computer 1 / Component 2 [Computer 1 = default]
2. Computer 2 / Component 2 [Displays only when I/O module is connected]
3. RCA Video (Composite video)
4. S-Video
5. HDMI