3M Steri-Vac GSX Series - Page 68

66 67
13.3.2. CycleReports
There are five (5) standard sections of a cycle report: Header, Graph, Table, Set‑points, and Footer. The contents for each of the five report sections are illustrated in Figures 80‑ 84. There are
three options for assembling a cycle report: Graph, Tableand Detailed. Table6explains the sections included in each cycle reportoption.
Header Graph Table Set‑points* Footer
Cycle Reports
Option
Graph Included Included N/A N/A Included
Table Included N/A Included N/A Included
Detailed Included Included Included Included Included
*Reference Section 11.13for a obtaining a detailed report of set points for customcycles.
Table6. Options for Standard CycleReports
Navigate to Menu>Reports>Cycle Reports to save or print a cyclereport.
Note: The print record will fade over time. Photocopy or electronically export reports for long‑termstorage.
Steri-Vac
TM
Sterilizer GS5X-1D
Serial number:
Software version:
Facility:
Sterilizer ID:
Start time:
Cycle count:
Cycle name:
Operator ID:
Load ID:
EO cartridge lot:
EA343434
1.0.1
Building 3
Machine 2
04/20/2015 05:27:42
33
GSX 55C
LMT
120413-1
2017-02AB
Figure80.
Example Cycle Report ‑Header