Rescanning the Controller
www.3ware.com 137
For more details about how the Rescan feature works, see the information in
the 3DM Reference section, under “Maintenance page” on page 204.
To rescan the controller through 3DM
1 In 3DM, choose
Management > Maintenance.
2 On the Maintenance page, click Rescan Controller.
3DM scans the controller for information about units and drives, and
updates the information shown on the
Maintenance page.
To rescan the controller through 3BM
1 From the main 3BM screen, press Alt-r.
You are warned that any configuration changes you have made in 3BM
will be lost.
2Type
Y for Yes.
The controller is rescanned.
To Next Page
Loading...
