Starting 3DM and Logging In
www.3ware.com 75
3 When the 3DM logon screen appears, select whether you are a User or
Administrator.
4 Enter your password and click
Login.
If you are logging in for the first time after installing 3DM, the default
password for both User and Administrator is
3ware.
Starting the 3DM Daemon under Linux and FreeBSD
3DM should start automatically after installation and upon bootup. If it does
not, use the steps below to start it.
To start the 3DM daemon manually
1 Login as root on the machine on which 3DM is installed.
2 Afterwards, type:
/etc/init.d/tdm2 start
3 To start the 3DM web application, open your browser and enter the URL
for your system.
https://localhost.888
If the 3DM connection is to a remote machine, you can replace
“localhost” with the IP address of the computer that contains the 3ware
controller. For example: https://<IP address>:888/
The 3DM login screen appears.
Note: If you forget the passwords, uninstalling and reinstalling 3DM
resets the passwords to 3ware
.
Note: If you close your browser, 3DM continues to run in the
background on the system.
To Next Page
Loading...
